Bond It - Astro Pro Adhesive
A tough, elastic hybrid seaming adhesive for the installation of artificial grass surfaces. 1 Tube Required for every 3m of Jointing Tape. Can be used in damp conditions
Astro Pro is a adhesive suitable for use inside and out, in all weather conditions. Has excellent bonding properties even on wet surfaces. Rapid cure time even at low temperatures. Remains fully elastic. Simple application; Ideal for maintenance and repair work.
| Simple/Quick Application to Jointing Tapes
Coloured Matched Grass Green
Can Be Applied in Damp, Cold Conditions
Fast Tack And Rapid Cure Times
One 310ml Tube Required for 3m of Joining
|Coverage||3 Linear Metres,|
We are now offering FREE delivery on ALL orders over £149 (Regardless of roll widths!)
Next Working Day is now available on the complete range to all UK mainland addresses! (Place your order by 3pm)
Same Day Delivery to all areas of the South East (See Sameday Services for further details)
All our delivery prices include VAT and are per order regardless of roll lengths or quantity!
Decking and Temporary Use
Lay the artificial grass out and trim to size. It will stay nice and flat by its own weight on any flat even surface. Place a plant pot/garden ornament on the corners it hold it down in areas that are exposed to strong winds.
Aqua Bond Adhesive
Lay and cut the artificial grass as above but instead of leaving it loose, use our Aqua Bond Adhesive to stick it to any clean smooth surface. This will prevent strong winds lifting the corners of the artificial grass.
If the surface to be covered will accommodate stapling such as exterior ply or decking use a staple gun or tack/nail it directly to the wood. This will prevent strong winds lifting the corners of the grass. Gaps between decking boards may show as lines on the surface of shorter pile artificial grass. We recommend shockpad underlay is stapled to decking first to reduce the chance of this occurring.
Concrete/ Patio Base
Make sure that the surface to be covered is clean and smooth ready to receive the artificial grass. A self levelling compound available from any DIY store can remove surface imperfections that may show through to the top surface especially on thinner pile height products. A quicker and cheaper alternative is to cover with our shockpad underlay first then roll out the grass on top.
Lay the artificial grass on to the clean/level area to be covered. Allow approximately 50mm of artificial grass to trim off to make that perfect edge ie in doorways or up a wall. Leave for around 1 to 2 days to settle. This helps stop any wrinkling or creasing occuring.
Cut and trim your artificial grass, using a sharp Stanley knife making sure their are no gaps between walls and grass. Always use sharp blades and change the blade every 3-5 metres
Soil / Sand Base
You should compact the ground, using a vibrating plate which can be hired at an equipment hire centre but for smaller areas something as simple as the back of a shovel will do
Lay the artificial grass on top of the sand/soil (as opposed to dragging it onto the base material). Allow approximately 50mm of artificial grass to trim off to make that perfect edge ie in doorways or up a wall. Leave for around 1 to 2 days to settle. This helps stop any wrinkling or creasing occuring.
For best results use our Sport-Fix Aqua Bond Adhesive on Sport-Fix Joining Tape this will give you a sports grade joins between sections of artificial grass on any surface. Alternatively you can bury a length of treated timber into the ground and staple/tack/nail the edges directly to it.