Gluecifer Applicator Straws (Single Use)

Every can of Gluecifer Adhesive comes with one of these applicator straws. 
However unless cleaned with glue cleaner spray then they are one time use.   
Purchase additional straws to enable multiple applications from the same adhesive can.

: Currently 41 Available : Currently 41 Available

£0.29

Imperial sizes in feet

Metres Required:

 

 

 

 

Specifications
Coverage N/A
Size N/A

We are now offering FREE delivery on ALL orders over £199  (Surcharges for remote areas may apply at checkout)

Next Working Day is now available on the complete range to all UK mainland addresses! (Place your order by 3pm)
Same Day Delivery to all areas of the South East  (See Sameday Services for further details)
 

All our delivery prices include VAT and are per order regardless of roll lengths or quantity! 


Overnight Delivery


Mainland UK  

Economy Service (Within 2-3 Working Days):  FREE OF CHARGE*
Express Service (Usually Next Working Day):  £24.99 (Cut off 3pm Mon-Fri)
*Excludes Highlands - Orders totals under £199. Max cost £18.99  (calculated on size & weight of product)

 

Scottish Highlands & Offshore Islands

Isle of Wight  + £10
Scottish Highlands £29.99 (3-5 Working Days)
Scilly / Scottish Isles  /Isle of Man
  £69.99 (5-7 Working Days)
Shetland / Outer Hebrides £79.99 (5-10 Working Days)
Channel Islands  £60.00 - £119.50 (7-14 Working Days)*
*Calculated at Checkout (based on weight)

 


Order before 3pm - Same day Dispatch - Mon - Fri


Delivery Times

Economy Service :Within 2-3 Working Days
Express Service: Usually Next Working Day
Same Day Service: Postcodes in South East (Full Prices & Details Click Here)    

 
Next Working Day Before 10:30am Service (£54.99)
Next Working Day Before 11:30am Service (£47.99)
Next Working Day Before 1pm Service (£41.99)
Saturdays (£58.99)


Order Tracking will be available to view the status of your delivery online.
Prices include loss & damage insurance and are inclusive of V.A.T
 

 

Contact CTA

Decking and Temporary Use

 

Loose Lay

Lay the artificial grass out and trim to size.  It will stay nice and flat by its own weight on any flat even surface.  Place a plant pot/garden ornament on the corners it hold it down in areas that are exposed to strong winds.

Aqua Bond Adhesive

Lay and cut the artificial grass as above but instead of leaving it loose, use our Aqua Bond Adhesive to stick it to any clean smooth surface.  This will prevent strong winds lifting the corners of the artificial grass.

Decking

If the surface to be covered will accommodate stapling such as exterior ply or decking use a staple gun or tack/nail it directly to the wood. This will prevent strong winds lifting the corners of the grass.  Gaps between decking boards may show as lines on the surface of shorter pile artificial grass. We recommend shockpad underlay is stapled to decking first to reduce the chance of this occurring. 
 

Concrete/ Patio Base

 

Preparation

Make sure that the surface to be covered is clean and smooth ready to receive the artificial grass. A self levelling compound available from any DIY store can remove surface imperfections that may show through to the top surface especially on thinner pile height products.  A quicker and cheaper alternative is to cover with our shockpad underlay first then roll out the grass on top. 

Acclimatising

Lay the artificial grass on to the clean/level area to be covered. Allow approximately 50mm of artificial grass to trim off to make that perfect edge ie in doorways or up a wall. Leave for around 1 to 2 days to settle. This helps stop any wrinkling or creasing occuring.

Trimming

Cut and trim your artificial grass, using a sharp Stanley knife making sure their are no gaps between walls and grass.  Always use sharp blades and change the blade every 3-5 metres

Joining

Make the seams using our Joining Tape and Aqua Bond Adhesive to give strong weather resistant bonds.


Soil / Sand Base

 

Preparation

You should compact the ground, using a vibrating plate which can be hired at an equipment hire centre but for smaller areas something as simple as the back of a shovel will do

Acclimatising

Lay the artificial grass on top of the sand/soil (as opposed to dragging it onto the base material). Allow approximately 50mm of artificial grass to trim off to make that perfect edge ie in doorways or up a wall. Leave for around 1 to 2 days to settle. This helps stop any wrinkling or creasing occuring.

Trimming

Cut and trim your artificial grass, using a sharp Stanley knife making sure their are no gaps between walls and grass. Always use sharp blades and change the blade every 3-5 metres

Joining

For best results use our Sport-Fix Aqua Bond Adhesive on Sport-Fix Joining Tape this will give you a sports grade joins between sections of artificial grass on any surface.  Alternatively you can bury a length of treated timber into the ground and staple/tack/nail the edges directly to it.

 

Download Spec Sheet Download Spec Sheet

Accept to view available products with shipping to your location.