40mm Super Thick, Super Lush, Super Heavyweight Artificial Grass.
Price per meter square inc VAT
This Grass has only ever been previously sold exclusively to the trade. This is by far one of the softest and Lush Artificial Grasses in the country. It has a deep and very dense 40mm pile, weighing 3.5kg per square metre. It has a 5 multi-tone effect giving it an outstanding appearance. Perfect for a heavily used lawn. As with our entire range no sand or rubber infill is required.
Unfortunately due to the weight of this product cut lengths are limited to 14m in the 2m widths and only 7m in the 4m widths. Longer lengths may be possible. Please call 0844 855 4704 for further details.
Child & Pet friendly
By not offering a fitting service, Express Grass can offer you the very best prices on artificial grass, and we believe you can easily lay your own artificial lawn with a small amount of preparation and a lot of pride.
Will stay flat under own weight
Low maintenance, never requires watering
|Roll Widths||2m, 4m|
|Total Height||42mm +/- 10%|
|Tuft Gauge||3/8 Inch|
|Pile Height||28mm +/- 10%|
|Weight per m2||2050 +/- 10%|
|UV Resistance||Every range has excellent UV Properties, all covered under a manufactures Warranty|
|Backing||Weed Resistant Black PP|
|Child Friendly||Yes. All of our ranges are perfect to use for play and activity areas.|
|Pet Friendly||Yes. All of our ranges are great for your pets at home.|
|Item Returns||This item can be returned|
We are now offering FREE delivery on ALL orders over £149 (Regardless of roll widths!)
Next Working Day is now available on the complete range to all UK mainland addresses! (Place your order by 3pm)
Same Day Delivery to all areas of the South East (See Sameday Services for further details)
All our delivery prices include VAT and are per order regardless of roll lengths or quantity!
Decking and Temporary Use
Lay the artificial grass out and trim to size. It will stay nice and flat by its own weight on any flat even surface. Place a plant pot/garden ornament on the corners it hold it down in areas that are exposed to strong winds.
Aqua Bond Adhesive
Lay and cut the artificial grass as above but instead of leaving it loose, use our Aqua Bond Adhesive to stick it to any clean smooth surface. This will prevent strong winds lifting the corners of the artificial grass.
If the surface to be covered will accommodate stapling such as exterior ply or decking use a staple gun or tack/nail it directly to the wood. This will prevent strong winds lifting the corners of the grass. Gaps between decking boards may show as lines on the surface of shorter pile artificial grass. We recommend shockpad underlay is stapled to decking first to reduce the chance of this occurring.
Concrete/ Patio Base
Make sure that the surface to be covered is clean and smooth ready to receive the artificial grass. A self levelling compound available from any DIY store can remove surface imperfections that may show through to the top surface especially on thinner pile height products. A quicker and cheaper alternative is to cover with our shockpad underlay first then roll out the grass on top.
Lay the artificial grass on to the clean/level area to be covered. Allow approximately 50mm of artificial grass to trim off to make that perfect edge ie in doorways or up a wall. Leave for around 1 to 2 days to settle. This helps stop any wrinkling or creasing occuring.
Cut and trim your artificial grass, using a sharp Stanley knife making sure their are no gaps between walls and grass. Always use sharp blades and change the blade every 3-5 metres
Soil / Sand Base
You should compact the ground, using a vibrating plate which can be hired at an equipment hire centre but for smaller areas something as simple as the back of a shovel will do
Lay the artificial grass on top of the sand/soil (as opposed to dragging it onto the base material). Allow approximately 50mm of artificial grass to trim off to make that perfect edge ie in doorways or up a wall. Leave for around 1 to 2 days to settle. This helps stop any wrinkling or creasing occuring.
For best results use our Sport-Fix Aqua Bond Adhesive on Sport-Fix Joining Tape this will give you a sports grade joins between sections of artificial grass on any surface. Alternatively you can bury a length of treated timber into the ground and staple/tack/nail the edges directly to it.